Fail the image build when the Nexus token is missing

`docker compose build` without NEXUS_TOKEN produced a Nexus 401 forty
seconds in, worded as a credentials problem when it was really an unset
variable. The mount's `required=true` asserts the secret was *declared*,
not that it holds anything, so an empty one sailed past it and npm sent
an empty `_authToken`.

The install moves to tools/docker-install-deps.sh, which checks the
secret before touching the network and fails in under a second with the
three ways to supply it. It is a file rather than inline shell because
BuildKit echoes an inline command twice on failure and buries the
message.

Also ignore .env. It carries NEXUS_TOKEN, compose reads it at build
time, and it was not gitignored — .env.example stays tracked. Nothing
had been committed: the only prior commit predates all of this.

Verified: empty token fails in 0.2s with the message; .env and the
environment variable both build; the image carries no trace of the
token and serves the full page.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

.dockerignore

@@ -11,6 +11,9 @@ tmp
 .claude
 docs
 landing-e2e
+
+# tools/ IS needed: the build stage copies docker-install-deps.sh from it.
+# The mock API servers in there are dev-only but too small to be worth excluding.
 **/*.spec.ts
 test-output
 .env

.env.example

@@ -1,10 +1,19 @@
-# Base URL of the Pireon API, without a trailing slash. Read on the server
+# Copy to `.env`. Compose reads it on its own — for the runtime settings below
-# only: the browser never talks to the API directly.
+# and for the build-time token. `.env` is gitignored; this file is not.
+
+# Base URL of the Pireon API, without a trailing slash. Read on the server only:
+# the browser never talks to the API directly.
 PIREON_API_URL=https://landing-api.pireon.dev/api
 
-# Host port the container is published on.
+# Host port the container is published on. Change it if something else already
+# holds 3000 on the machine — the container always listens on 3000 internally.
 LANDING_PORT=3000
 
-# Only needed to *build* the image: `@pi/ui` comes from the private Nexus.
+# Needed only to *build* the image: `@pi/ui` comes from the private Nexus.
-# Not read at runtime, and never baked into a layer — see Dockerfile.
+# Locally this is the value already sitting in ~/.npmrc:
+#
+#   grep nexus.pireon.dev ~/.npmrc
+#
+# Never baked into a layer — it is mounted as a BuildKit secret. An empty value
+# fails the build immediately with an explanation rather than a Nexus 401.
 NEXUS_TOKEN=

.gitignore

@@ -46,3 +46,13 @@ Thumbs.db
 
 .nx/polygraph
 .angular
+
+# Secrets. `.env` holds NEXUS_TOKEN, which compose reads at build time, so it
+# must never be committed — `.env.example` is the one that is.
+.env
+.env.*
+!.env.example
+
+# A per-machine npmrc would carry a Nexus token; the committed one at the repo
+# root deliberately holds none.
+.npmrc.local

Dockerfile

@@ -19,14 +19,12 @@ COPY package.json package-lock.json .npmrc ./
 
 # `@pi/ui` comes from the private Nexus, so the install needs a token — passed
 # as a BuildKit secret rather than a build ARG, which would be readable forever
-# in the image history. The npmrc it lands in is written and removed inside one
+# in the image history. The script checks the secret actually holds something
-# layer, so it leaves no trace even in this discarded stage.
+# before spending four minutes finding out from Nexus.
+COPY tools/docker-install-deps.sh ./tools/
+
 RUN --mount=type=secret,id=nexus_token,required=true \
-    sh -eu -c '\
+    sh tools/docker-install-deps.sh
-      printf "//nexus.pireon.dev/repository/npm-releases/:_authToken=%s\n" \
-        "$(cat /run/secrets/nexus_token)" > /tmp/npmrc; \
-      NPM_CONFIG_USERCONFIG=/tmp/npmrc npm ci --no-audit --no-fund; \
-      rm -f /tmp/npmrc'
 
 COPY nx.json tsconfig.base.json eslint.config.mjs ./
 COPY landing ./landing

README.md

@@ -18,10 +18,25 @@ npm run e2e        # Playwright end-to-end tests
 ## Deploying
 
 ```sh
-NEXUS_TOKEN=… docker compose build
+cp .env.example .env      # then fill in NEXUS_TOKEN
+docker compose build
 docker compose up -d
 ```
 
+Compose reads `.env` on its own, for the build token as well as the runtime
+settings. `.env` is gitignored; `.env.example` is the one that is committed. If
+you would rather not keep the token on disk:
+
+```sh
+NEXUS_TOKEN=… docker compose build
+```
+
+An empty or missing token fails the build in under a second with a message
+saying so. That check is there because the mount's own `required=true` only
+asserts the secret was *declared* — an empty one passes it and then surfaces a
+minute later as a Nexus 401 that reads like a credentials problem when it is
+really a forgotten variable.
+
 Two stages. The build one runs Nx and the Angular compiler over the whole
 workspace and is thrown away; only `dist/landing/analog` crosses into the
 runtime image, because Nitro vendors its own dependencies into that output —

tools/docker-install-deps.sh

@@ -0,0 +1,52 @@
+#!/bin/sh
+# Installs the workspace's dependencies inside the image.
+#
+# Split out of the Dockerfile so a failure prints this file's own message
+# instead of BuildKit echoing a twenty-line inline shell twice.
+set -eu
+
+TOKEN_FILE=/run/secrets/nexus_token
+NEXUS_PATH=//nexus.pireon.dev/repository/npm-releases/
+
+# `required=true` on the mount only asserts the secret was declared, not that it
+# holds anything. An empty one sails past it and surfaces four hundred packages
+# later as a Nexus 401 that reads like a credentials problem.
+if [ ! -s "$TOKEN_FILE" ]; then
+  cat >&2 <<'MSG'
+
+ERROR: the nexus_token build secret is empty.
+
+@pi/ui is published to the private Nexus, so the install needs a token.
+
+  compose:  NEXUS_TOKEN=... docker compose build
+            or put NEXUS_TOKEN in .env, which compose reads on its own
+  docker:   docker build --secret id=nexus_token,env=NEXUS_TOKEN .
+
+Locally the value is the one already in ~/.npmrc:
+
+  grep nexus.pireon.dev ~/.npmrc
+
+MSG
+  exit 1
+fi
+
+# Written and removed inside a single layer, so it leaves no trace even in this
+# stage — which is discarded anyway.
+NPMRC=/tmp/npmrc
+printf '%s:_authToken=%s\n' "$NEXUS_PATH" "$(cat "$TOKEN_FILE")" > "$NPMRC"
+
+if NPM_CONFIG_USERCONFIG="$NPMRC" npm ci --no-audit --no-fund; then
+  rm -f "$NPMRC"
+else
+  status=$?
+  rm -f "$NPMRC"
+
+  if [ "$status" -ne 0 ]; then
+    echo "" >&2
+    echo "npm ci failed. If the error above is a 401 from nexus.pireon.dev," >&2
+    echo "the token was present but is not valid for npm-releases." >&2
+    echo "" >&2
+  fi
+
+  exit "$status"
+fi